DIRECTIONS: 1. PROTECT: Work area must be protected from accidental spills. 2. CLEAN: Surfaces
must be clean, dry and free of grease and oil. 3. PREPARE: Roughen smooth surfaces (using abrasives
or sandpaper). 4. OPEN PACKAGE: Remove syringe. Using a sharp blade, cut off tips of both nozzles.
5. DISPENSE: Depress plunger to dispense resin and hardener. Thoroughly mix resin & hardener on a
clean, discardable surface for 2 to 3 minutes until evenly colored. 6. APPLICATION: Apply a small
amount of mixture to both surfaces and assemble parts immediately (product sets in 4-6 minutes).
Remove any excess epoxy immediately. 7. CURE TIME: Usable strength is reached in four hours at
72°F (22°C). Cooler temperatures may require longer set time. 8. CLEAN-UP: Attach nozzle cap and
store in molded tray. NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.
1General purpose epoxy with non-drip gel formula for mess free application
2Blue dye indicator disappears when epoxy is ready to apply
3Permanent strength up to 3000 PSI strength
4Dries clear and no clamping required
5Water resistant, non-shrinking formula
Looking to take your training to the next level? Register for Permatex’s free online- training portal to gain access to live training seminars, ASE-accredited courses, how-to videos and more.
For the professionals. By the professionals.
