DIRECTIONS:
1. Surface must be clean, dry and free from grease and dirt. Use Permatex Brake & Parts
Cleaner for best surface preparation; use isopropyl alcohol on plastics. To improve bond
strength, roughen bond area with coarse sandpaper or wire brush prior to application.
2. Squeeze out equal amounts of weld agent and hardening agent; mix thoroughly until color is
uniform.
3. Apply to surface being repaired and remove excess material immediately.
4. Sets in 8 minutes. Allow 16 hours (overnight) before returning part(s) to service.
1Two-part adhesive and filler system that eliminates the need for welding or brazing
2Dries dark grey
3Resistant to anti-freeze, fuel, oil, water and other automotive fluids
4Can be drilled, filed and threaded
5Up to 3000 PSI strength on steel
