DIRECTIONS: 1. Surfaces to be bonded should be clean and
dry. To ensure good adhesion, rough-up surfaces if possible.
2. Remove protective film from cup. Using one of the mixer
sticks provided, push down the center of the kit to form mixer
cup. Scrape all epoxy resin into the center of the cup and mix
thoroughly (approximately one minute). 3. Use mixing stick to
apply epoxy to bonding area. Press surfaces together until set.
4. While epoxy is still tacky, the excess can be removed with
solvent. 5. Parts fixture in 5-15 minutes, full cure achieved in
24 hours.
1Convenient premeasured epoxy mixer cups contain resin and hardener in one
2Excellent chemical resistance
3May be drilled, tapped, sanded, or machined and painted after cure
4Fills porosities and can be used to build up worn parts
5Bonds in 5-15 minutes; useable in 30 minutes
Looking to take your training to the next level? Register for Permatex’s free online- training portal to gain access to live training seminars, ASE-accredited courses, how-to videos and more.
For the professionals. By the professionals.
