Directions: 1. To achieve optimum adhesion, clean grease or dirt off surfaces to be repaired. 2. Wearing gloves, twist or cut off required amount. 3. Mix by kkneading epoxy stick to a uniform color. If mixing is difficult, warm epoxy stick to room temperature or slightly above. 4. Apply to the repair surface within 30 minutes of mixing, forcing into any cracks or holes to be filled. Remove excess material with a tool moistened with clean water before hardening begines. NOTE: when applying to a damp, wet or slowly leaking area, work the mixed epoxy into the surface ad apply pressure until adhesion begins to take effect. Fuel Tank Repair epoxy sets in 1 hour, can be machined in 5 hours and fully cures in 24 hours. DOES NOT ADHERE TO POLYETHYLENE OR POLYPROPYLENE PLASTICS. THIS MATERIAL IS NOT INTENDED FOR STRUCTURAL BONDING.
1Two part, hand kneadable, putty type epoxy stick
2Used for repairing metal gas tanks and containers
3Contrasting colored materials are mixed together to form a uniform color to indicate thorough mixing
4Cured adhesive can be drilled, sanded, threaded or filed
5Resistant to fuels and most solvents after full cure
Looking to take your training to the next level? Register for Permatex’s free online- training portal to gain access to live training seminars, ASE-accredited courses, how-to videos and more.
For the professionals. By the professionals.
